You will need: wall anchors; an electric drill; a #2 phillips head screw driver; a drill bit (1/8″), a level, a set of four standoffs and a clear acrylic print. Your clear acrylic print will come with a paper template which will mark all four of the corner holes of your print.

Take your clear acrylic print and the matching paper template out of the package envelope.
For the next step you will need just the paper template.

Use a level when placing the paper template in the desired wall space. This ensures the art will be hung correctly.

Use 1/8″ drill bit to pre drill through the center of each hole marked on the template.

Take the paper template off the wall and now you have four perfectly lined up pre-drilled holes.
Now you can install the wall anchors.

Install standoff base into wall anchors. Or straight to the wall in case you run into a stud.

Place art up to standoffs and screw in standoff heads, starting with the top two.

Wipe your art piece with a cleaning cloth and enjoy a new look of your wall.